hw version returns this btw:
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: svn 486-unclean 2011-08-28 18:52:03
#db# os: svn 486-unclean 2011-08-28 18:52:03
#db# FPGA image built on 2009/12/ 8 at 8: 3:54
I haven't updated the firmware yet, because I was scared to break the proxmark (it is an expensive little fella after all...), because i found about 3 different versions of the documentation and I couldn't figure out which one was the latest one/the one for my firmware. Could that be the reason why i can't read Legic cards properly? If so, i'll give that a try.
I got this fancy Proxmark3 from work to "play with".
hw tune returns this:
# LF antenna: 0.00 V @ 125.00 kHz
# LF antenna: 0.00 V @ 134.00 kHz
# LF optimal: 0.00 V @ 12000.00 kHz
# HF antenna: 8.93 V @ 13.56 MHz
# Your LF antenna is unusable.
So I'm assuming both the proxmark and the hf antenna work.
However, when I try to read a legic card, the result is always the same:
#db# setting up legic card
#db# Unknown card format: 26
I tried this with 2 different cards but it didn't work with either one.
In this Forum I read that Unknown card format:26 means that either the card returned 8 0 bits, or that the antenna didnt read anything at all. Unfortunately, I couldn't find any more information on that, though.
If anyone has experienced this problem before or knows a solution anyway, I'd appreciate your help very much.
Cheers WT
]]>