Will write wiki first though.
You were right keeping these up to date will be a chore. Expect to have to do some compiling to stay current.
]]>the main interersting PM3 repo's according to me.
PM3 Master https://github.com/Proxmark/proxmark3/releases
Marshmellow Fork Master https://github.com/marshmellow42/proxmark3
Iceman Fork Master https://github.com/iceman1001/proxmark3/releases
I included just the client in yours only, but I will for all builds now.
]]>Suggestion:
Matty has a standalone modd also. https://github.com/mattaereal/proxmark3
Feedback:
Is it possible that you either add the compiled client or make it even more clean that for every custom firmware, you need to run the compile client with it. ie a fullimage from iceman fork will not work with the pm3 master proxmark client.
With your Kali compilations, would you mind updating the github wiki and add a "kali" section under compilation for Linux?
]]>I might do a HF demo eventually, but most stuff I see around here is the older HID cards
The LF firmware does HID emulation and cloning
And proxbrute does brute forcing
- but I still don't understand the light sequence... after a read on Bank1 (CD) it shifts to ABC ...how can in it be in Bank1 (C) and Bank2 (A) at the same time as the lights indicate after a read, it auto advances to sim mode and I would expect it to just show C and B - that is, Bank1 - Simulation mode. The lights show ABC!
What am I missing? ExploitAgency's note shows only B and C - how come I am also getting A? Just curious - planning on porting it to a droid methinks - so it may end up moot.
]]>pressing the button again puts you in read mode for Bank2 as expected... A,D after reading a card A, B for emulation of Bank2.
I emailed Elechouse - they simply asked if everything else seemed to be working, and to default to lf on startup they suggested I roll back to 2.0.0 if I want to match the video.
LED Combinations:
C and D record to bank 1
C and B emulating bank 1
A and D record to bank 2
A and B emulating bank 2
Instructions:
Long press button until
Several LED flash in sequence
LED C is now lit
Longpress button until LED D lights as well as C
Place card on antenna to be read
D goes off when card is read
Short press button
B and C is lit
Card is now being Emulated