This is the source code in vb.net http://www.sendspace.com/file/zzqjbv
the settings file allows you to change the port number and some other settings.
This one was hard to make because source code is really bad-explained in the "official" examples...
]]>u say "the project is abandoned" but I see these posts are not old.
They are. There are only four active topic on this forum and that's including this one.
u say "bad taste to continue selling over-stock boards" but the board works and there is documentation to study it.
The board 'works', but barely. More than half of the times I have tried it, it doesn't work at all; The graphic window isn't opened, nothing is displayed, or the programs just hangs without apparent reason. And I can live with all of these short comings, but the most recent changes in the repository date from end February, beginning of March.
i still did't bought the board but i don0t understand your sentence.
Are you planning to close the forum?
That's not up to me, and closing would suit no purpose at all. I'm just making an observation: It's awfully quiet here.
Do you know any other board with these functionalities? can you suggets it to me?
There are some alternatives, but I cannot cough them up by heart. But none of them are a good and versatile as this one. It's jus a pity that development has stalled.
Again; I understand perfectly. I'm running a hobby software project myself. After some time, especially if things start working and solve the original problem, motivation to improve it drops. I fully understand. But when you're selling rather expensive boards, buyers will have expectations and those are not met currently.
hi jonor,
i'm new on this forum.
i'm interested in SRIX4K argument.
if i well understood these RF-ID has password protection to read/write data. is it correct?
Could i read/write these tags with your code?What about the "anticlone function" and "anti-tearing protection" and "write protect feature" mentioned on the datasheet?
You bypassed all these protections?
I'm afraid this topic is dead. Development on the whole project dropped to second-to-none, quite typical for Open Source development; As soon as the project fixes the original problem the founder(s) tried to solve, further development drops, sacrificing usability for others, defeating the purpose of Open Source. It's a pitty, but understandable. Though I do think it's a bit of bad taste to continue selling over-stock boards without mentioning the project has been abandonned.
Anyway, to answer your questions:
Anti-clone function is not implemented. It uses proprietary commands only described in a separate manual which is supplied under a very strict NDA. If someone here has this manual, he's not allowed to discus the contents, let alone implement simulation, without violating the NDA he has signed.
I don't know about anti-tearing but is is probably not implemented.
Write protection, OPT bits and counters aren't implemented for sure. What this implementation basically does is provide 4096byte of R/W RF-ID memory. None of the special functions of any addresses are implemented.
Immagination is more important than knowledge.
So you prefer astrology above astronomy?
]]>What about the "anticlone function" and "anti-tearing protection" and "write protect feature" mentioned on the datasheet?
You bypassed all these protections?
If you have spare SIRX4K tags, I would be interested by the way!
I think I can dig one up for you, if it's still an issue; A used one, with the non-incrementable down counters depleted to 0, that is.
Can these tags already be simulated?
]]>I am not a native speaker either.
No problems, the important is understand!!!
I just meant that if you can get hold of enough samples, I would be interested if you could send me one or two!
I have only one SRIX4K, I bought it some months ago from Digikey for testing
]]>edo512 wrote:I would be interested by the way!
Sorry, but my english is not very good, I don't understand very well this phrase
I am not a native speaker either. I just meant that if you can get hold of enough samples, I would be interested if you could send me one or two!
Ed
]]>I would be interested by the way!
Sorry, but my english is not very good, I don't understand very well this phrase
Please let us know if the commit works for you,
For me works without problems.
]]>