The hf 14a in output says no Chinese magic backdoor detected, so I don't think the cload command works with that card.
What gen card is that?
Thanks but that is the output from the original fob
]]>What gen card is that?
]]>my firmware is pretty recent but not the latest. I will update and try again
Prox/RFID mark3 RFID instrument
bootrom: master/v3.0.1-301-gc839fa2-suspect 2018-02-04 05:20:34
os: master/v3.0.1-301-gc839fa2-suspect 2018-02-04 05:21:39
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2017/10/27 at 08:30:59
uC: AT91SAM7S512 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 512K bytes. Used: 196803 bytes (38%). Free: 327485 bytes (62%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
proxmark3> hf 14a in
UID : ex xx xx 2a
ATQA : 00 04
SAK : 08 [2]
TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1
proprietary non iso14443-4 card found, RATS not supported
No chinese magic backdoor command detected
Prng detection: HARDEND (hardnested)
proxmark3>
Testing block 63, keytype 1, with 85 keys
________________________________________
|Sector|Block| A | B |
|--------------------------------------|
| 1 | 3 |A0A1A2A3A4A5|B0B1B2B3B4B5|
| 2 | 7 |xxxxxxxxxxxxx|YYYYYYYYYYYYY|
| 3 | 11 |xxxxxxxxxxxxx|YYYYYYYYYYYYY| <---- changed for privacy
| 4 | 15 |xxxxxxxxxxxxx|YYYYYYYYYYYYY|
| 5 | 19 |xxxxxxxxxxxxx|YYYYYYYYYYYYY|
| 6 | 23 |xxxxxxxxxxxxx|YYYYYYYYYYYYY|
| 7 | 27 |xxxxxxxxxxxxx|YYYYYYYYYYYYY|
| 8 | 31 |xxxxxxxxxxxxx|YYYYYYYYYYYYY|
| 9 | 35 |xxxxxxxxxxxxx|YYYYYYYYYYYYY|
| 10 | 39 |xxxxxxxxxxxxx|YYYYYYYYYYYYY|
| 11 | 43 |xxxxxxxxxxxxx|YYYYYYYYYYYYY|
| 12 | 47 |xxxxxxxxxxxxx|YYYYYYYYYYYYY|
| 13 | 51|xxxxxxxxxxxxx|YYYYYYYYYYYYY|
| 14 | 55 |xxxxxxxxxxxxx|YYYYYYYYYYYYY|
| 15 | 59 |xxxxxxxxxxxxx|YYYYYYYYYYYYY|
| 16 | 63 |FFFFFFFFFFFF|FFFFFFFFFFFF|
|--------------------------------------|
Do you wish to save the keys to dumpfile? [y/n] ?y
Select a filename to store to (default: dumpkeys.bin )
Secondly i dumped the keys
|-----------------------------------------|
|------ Reading sector access bits...-----|
|-----------------------------------------|
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
#db# READ BLOCK FINISHED
|-----------------------------------------|
|----- Dumping all blocks to file... -----|
|-----------------------------------------|
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 0.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 0.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 0.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 0.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 1.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 1.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 1.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 1.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 2.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 2.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 2.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 2.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 3.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 3.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 3.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 3.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 4.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 4.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 4.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 4.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 5.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 5.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 5.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 5.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 6.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 6.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 6.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 6.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 7.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 7.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 7.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 7.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 8.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 8.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 8.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 8.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 9.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 9.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 9.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 9.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 10.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 10.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 10.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 10.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 11.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 11.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 11.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 11.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 12.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 12.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 12.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 12.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 13.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 13.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 13.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 13.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 14.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 14.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 14.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 14.
#db# READ BLOCK FINISHED
Successfully read block 0 of sector 15.
#db# READ BLOCK FINISHED
Successfully read block 1 of sector 15.
#db# READ BLOCK FINISHED
Successfully read block 2 of sector 15.
#db# READ BLOCK FINISHED
Successfully read block 3 of sector 15.
Dumped 64 blocks (1024 bytes) to file dumpdata.bin
proxmark3>
Thirdly I convert them to .eml
script run dumptoemul.lua
--- Executing: dumptoemul.lua, args ''
Wrote an emulator-dump to the file Exxx32A.eml
-----Finished
then went to load the file on to the new blank fob and ran into this issue...
proxmark3> hf mf cload Exxx32A
#db# halt error. response len: 1
Chinese magic backdoor commands (GEN 1a) detected
Loading magic mifare 1K
#db# halt error. response len: 1
proxmark3>
Any suggestions where i went wrong?
]]>