emm...
If its problem actual, I had this message, when i write 0 block and 1 block same data
hf mf cset blk
You must write another data in 0 block. And your tag should work.
]]>try different distance between antenna and tag...
No matter how long it is, it still has no response. It has always been the following state:
pm3 --> hf search
[-]timeout while waiting for reply.
ATQA : 00 04
Tag doesn't support the Topaz protocol.
no known/supported 13.56 MHz tags found
pm3 --> hf 14a reader
[!] iso14443a card select failed
Is anyone here?
maybe try official firmware maybe
]]>pm3 --> hw tune
[+]measuring antenna characteristics, please wait...
.
.
.
[+]LF antenna: 20.68 V - 125.00 kHz
[+]LF antenna: 13.88 V - 134.00 kHz
[+]LF optimal: 24.36 V - 118.81 kHz
[+] LF antenna is OK
[+]HF antenna: 12.71 V - 13.56 MHz
[+] HF antenna is OK
[+]Displaying LF tuning graph. Divisor 89 is 134khz, 95 is 125khz.
But when I tried to use hf search and hf topaz rader to read, it returned the following results.
pm3 --> hf search
[-]timeout while waiting for reply.
ATQA : 00 04
Tag doesn't support the Topaz protocol.
no known/supported 13.56 MHz tags found
pm3 --> hf topaz reader
ATQA : 00 04
Tag doesn't support the Topaz protocol.
This is my firmware information.
Proxmark3 RFID instrument
[ ARM ]
bootrom: iceman/master/2018v3.1.0-苏州龙达定制版 2018-05-15 09:35:11
os: iceman/master/2018v3.1.0-苏州龙达定制版 2018-05-15 09:51:29
[ FPGA ]
LF image built for 2s30vq100 on 2017/10/25 at 19:50:50
HF image built for 2s30vq100 on 2017/11/10 at 19:24:16