Any way to have a firmware version that works with android, windows, and mac os clients?
]]>[=] Reading sector access bits...
................
[+] Finished reading sector access bits
[=] Dumping all blocks from card...
[+] successfully read block 0 of sector 0.
[+] successfully read block 1 of sector 0.
[+] successfully read block 2 of sector 0.
[+] successfully read block 3 of sector 0.
[+] successfully read block 0 of sector 1.
[+] successfully read block 1 of sector 1.
[+] successfully read block 2 of sector 1.
[+] successfully read block 3 of sector 1.
[+] successfully read block 0 of sector 2.
[+] successfully read block 1 of sector 2.
[+] successfully read block 2 of sector 2.
[+] successfully read block 3 of sector 2.
[+] successfully read block 0 of sector 3.
[+] successfully read block 1 of sector 3.
[+] successfully read block 2 of sector 3.
[+] su...
....
+] successfully read block 3 of sector 15.
[+] time: 52 seconds
[+] Succeded in dumping all blocks
[!] file not found or locked. '/sdcard/NfcTools/pm3/hf-mf-B40A982D-data.bin '
[+] saved 64 blocks to text file /sdcard/NfcTools/pm3/hf-mf-B40A982D-data-2.eml
[+] saved to json file /sdcard/NfcTools/pm3/hf-mf-B40A982D-data-2.json
Please focus this:
[!] file not found or locked. '/sdcard/NfcTools/pm3/hf-mf-B40A982D-data.bin '
There is no such file in this directery, anyone can help??????????
]]>Anyway, last test is on a Samsung A8 2018 with android 9. Full success!
PM3 is back on track!
I downloaded also the RRG app and tried to connect the PM3 but even with pairing PM3 with my phone and entered pin code, the connecting page in the app stayed with "404 not found device, dropdown refresh".
I did the steps again and again but without good results. I tried with 2 differents phones : Crosscall action X3 and an HUAWEI HONOR 7.
May the issue come from the phone?
(12 – Aug – 2019):
Android App Compatible
If you have questions about it, you will need to email android at rfidresearchgroup.com
About your output, how about follow the instructions it says? The RRG/Iceman repo is quite well documented so you find all information regarding compiling/flashing/running. Good starting point is the readme.
]]>Hi. Sorry for the noob question.
I have installed the app on my android and it informed me that the firmware needs to match and provides the link as http://proxgrind.com/free-sdk/ which forwards to https://github.com/RfidResearchGroup/proxmark3 - RRG / Iceman repo - Proxmark3 ~ bleeding edge ~
I followed the instructions to install this via Mac and I get the following:
bigbrother$ sudo proxmark3-flasher /dev/tty.usbmodemicema1 -b /usr/local/Cellar/proxmark3/HEAD-b4400bb/share/firmware/bootrom.elf /usr/local/Cellar/proxmark3/HEAD-b4400bb/share/firmware/fullimage.elf
Password:
[=] Session log /Users/bigbrother/.proxmark3/log_20190901.txt
[+] Waiting for Proxmark3 to appear on /dev/tty.usbmodemicema1
.Found
[+] Entering bootloader...
[+] (Press and release the button only to abort )
[+] Waiting for Proxmark3 to appear on /dev/tty.usbmodemicema1
....... Found
[!!] ====================== OBS ! ===========================================
[!!] Note: Your bootloader does not understand the new CMD_BL_VERSION command
[!!] It is recommended that you first update your bootloader alone,
[!!] reboot the Proxmark3 then only update the main firmware
[=] Available memory on this board: UNKNOWN
[!!] ====================== OBS ! ======================================
[!!] Note: Your bootloader does not understand the new CHIP_INFO command
[!!] It is recommended that you first update your bootloader alone,
[!!] reboot the Proxmark3 then only update the main firmware
[=] Permitted flash range: 0x00100000-0x00140000
[!!] Could not open file /usr/local/Cellar/proxmark3/HEAD-b4400bb/share/firmware/bootrom.elf >>>
[!!] Aborted on error.
Have a nice day!
Please could someone lend some advice, help, or suggestions
thanks
]]>The zip says compiled and that link leads to a webdownload requiring a login.
use apktool
https://www.youtube.com/watch?v=2ztTY1QCqzM
]]>Its that strange matching to firmware version.
Someone with decompilation skills? Send me a decompiled version
I didn't look too hard. But isn't it in the link I posted? Above?
https://www.dropbox.com/s/e2qf24j9bzvz5el/%5BCompiled%5DPM3-RRG-20190809.zip%20%28-17%20MB%29.url?dl=0
]]>Someone with decompilation skills? Send me a decompiled version
]]>This is a NEED not a want! ??♥️
]]>Unfortunately the connection works for me only over OTG cable, integrated Bluetooth not yet. (Google Pixel 3 Stock Image, custom Kernel)
With BlueShark I'm getting a
Communication is normall
Device init error, please check your client version
Dialog. I use the compiled firmware from 20190707 on my proxmark3.
BTW/FYI: make sure your android is running in english, because if you have a language other than english, the app is in Chinese
]]>theguy@thetty wrote:There seems to be a bug in the newly released app that makes the app crash every time on startup on some devices.
I'm getting a
java.lang.UnsatisfiedLinkError: JNI_ERR returned from JNI_OnLoad in '/data/data/cn.rrg.nfctools/.jiagu/libjiagu_64.so'
Don't quote me on that but my superficial research hints to this being a problem only with 64-bit architectures??
Thank you very much for all your efforts and the amazing work you are putting in this app and the proxmark3 in general!
I'm super excited to trying out this app!
According to a Twitter post from RRG this issue has been fixed and the new app will be available on Google Playstore within the next few days!
Here is the fixed version. FYI - It opens. Now I need to order a RDV4 with all the bells and whistles.
http://proxgrind.com/free-sdk/
]]>