Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2022-04-14 21:50:19

Apt-Get
Contributor
Registered: 2015-12-23
Posts: 111

HID Clone with pm3 v2 elechouse.

HI Guys. Im having trouble cloning a HID card on my new macbook with an old pm3

What am i missing here?
How do i clone this?

Things have changed. I havent been keeping up.

Any help is much appreciated.

Thanks
APT.


[usb] pm3 --> lf hid rea
[+] [H10302  ] HID H10302 37-bit huge ID          CN: 4840732364  parity ( fail )
[+] [H10304  ] HID H10304 37-bit                FC: 9232  CN: 505548  parity ( fail )
[+] [MDI37   ] PointGuard MDI 37-bit            FC: 9  CN: 8894156  parity ( fail )
[=] found 3 matching formats
[+] DemodBuffer:
[+] 1D555559655655AA69A69695

[=] raw: 0000000000000002410f6d98





[ Proxmark3 RFID instrument ]

[ CLIENT ]
  client: RRG/Iceman/master/v4.14434 2021-09-18 21:44:55
  compiled with Clang/LLVM Apple LLVM 13.0.0 (clang-1300.0.29.3) OS:OSX ARCH:aarch64

[ PROXMARK3 ]
  firmware.................. PM3 GENERIC

[ ARM ]
  bootrom: RRG/Iceman/master/v4.14434 2021-09-18 21:44:55
       os: RRG/Iceman/master/v4.14434 2021-09-18 21:44:55
  compiled with GCC 10.2.1 20201103 (release)

[ FPGA ]
  LF image built for 2s30vq100 on 2020-07-08 at 23:08:07
  HF image built for 2s30vq100 on 2020-07-08 at 23:08:19
  HF FeliCa image built for 2s30vq100 on 2020-07-08 at 23:08:30

[ Hardware ]
  --= uC: AT91SAM7S512 Rev B
  --= Embedded Processor: ARM7TDMI
  --= Internal SRAM size: 64K bytes
  --= Architecture identifier: AT91SAM7Sxx Series
  --= Embedded flash memory 512K bytes ( 53% used )

Offline

#2 2022-04-14 21:53:06

Apt-Get
Contributor
Registered: 2015-12-23
Posts: 111

Re: HID Clone with pm3 v2 elechouse.

all good i figured it out. thanks.

Offline

Board footer

Powered by FluxBB