Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2022-11-03 01:48:07

barbar
Contributor
Registered: 2022-10-21
Posts: 3

Clone Pyramid doesn't work

Clone command doesn't seem to write at all - am doing something wrong?

Any help appreciated ?

[usb] pm3 --> lf search 

[=] NOTE: some demods output possible binary
[=] if it finds something that looks like a tag
[=] False Positives ARE possible
[=] 
[=] Checking for known tags...
[=] 
[+] Pyramid - len: 70 -unknown- Card: 1450, Raw: 000101xxxxxxxxxxxxxxxxxxxxxxxxxx


[+] Valid Pyramid ID found!

[=] Couldn't identify a chipset
[usb] pm3 --> lf pyramid clone --raw 000101xxxxxxxxxxxxxxxxxxxxxxxxxx --em
[!] ⚠️  Beware some EM4305 tags don't support FSK and datarate = RF/50, check your tag copy!
[=] Preparing to clone Farpointe/Pyramid to EM4305/4469 from raw hex.
[+] Blk | Data 
[+] ----+------------
[+]  00 | 000XXXXX
[+]  01 | FXXXXXXX
[+]  02 | FXXXXXXX
[+]  03 | BXXXXXXX
[+]  04 | AXXXXXXX
[+] Done
[?] Hint: try `lf pyramid reader` to verify
[usb] pm3 --> lf pyramid reader
[usb] pm3 --> lf pyramid reader
[usb] pm3 --> lf pyramid reader
[usb] pm3 --> 

Offline

Board footer

Powered by FluxBB