Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2011-11-17 10:02:56

sujai
Member
Registered: 2011-11-17
Posts: 2

design multi-frequency reader

hi friends,

I am new to this website. I am final year engineering student i want to do project on rfid multi-frequency reader that will read 134khz and 13.56Mhz.
is this reader device can read both the frequencies ? can someone give me the schematic for this reader device..?

Thanks in advance
sujai

Offline

#2 2011-11-17 11:15:16

0xFFFF
Administrator
From: Vic - Australia
Registered: 2011-05-31
Posts: 630

Re: design multi-frequency reader

Hi sujai,

The Proxmark will read 125kHz, 134kHz and 13.56MHz. It can do a lot more than just that! Everything you need is here: http://code.google.com/p/proxmark3/

I'm curious, how did you manage to find the forum and not the repository?


Want to contact me? Here's my email address...
modhex(ecijhhhhhhhhfchdhbidhniihghdduhehvhtduhbig)

Offline

#3 2013-08-30 10:26:26

elektryk
Contributor
Registered: 2009-09-10
Posts: 43

Re: design multi-frequency reader

Solution is simple take two digital front-ends (one for 125kHz and one for 13MHz) and connect to single microprocessor.

Offline

#4 2014-12-31 10:56:12

qudsia
Member
Registered: 2014-12-31
Posts: 1

Re: design multi-frequency reader

Hi, brokentesting. I was wondering if you were able to find these tools?


sara

Offline

Board footer

Powered by FluxBB