Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2009-02-19 11:49:01

shinechou
Contributor
Registered: 2008-10-20
Posts: 35

how to decrypt the mifare-log with "crapto1" tool

hi all,

I'm confused how to decrypt the mifare-log with "crapto1" tool (the newest version 1.0), I can use it to recovery the Key.

for example, in the post http://www.proxmark.org/forum/viewtopic.php?id=71, after the authentication the reader will read the blocks of Mifare-Tag, so how to decrypt the ciphertext "[Block(00)]: c7! 84! b5! 92! a4! 16! 82  fe  eb! 0b! ac  22! ed! 89  e1! 6d  1e  6e!" to get the plaintext "Block(00): 00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  37  49"?

would be "ks4^ciphertext"? and the next block would be "ks5^ciphertext"?


thx in advance!

Last edited by shinechou (2009-02-19 11:51:37)

Offline

#2 2009-02-19 13:03:00

rule
Member
Registered: 2008-05-21
Posts: 417

Re: how to decrypt the mifare-log with "crapto1" tool

Please post your messages only once wink

ks4(4 bytes long) is xor'ed against the read command from the reader.
ks5(18 bytes long) is xor'ed to the 16 bytes data + 2 bytes crc from the tag

I hope this helps, cheers,

  roel

Offline

#3 2009-02-20 04:36:32

shinechou
Contributor
Registered: 2008-10-20
Posts: 35

Re: how to decrypt the mifare-log with "crapto1" tool

thx! I'll try to decrypt the block as u said!

sorry, I'll post only once from now!

Offline

Board footer

Powered by FluxBB