Proxmark3 community

urkis

Contributor

Registered: 2012-02-12

Posts: 30

Running on raspberry pi

Does anyone tried to run Proxmark with Raspberry Pi?
I have some plans to do a little mini box with a hexadecimal keypad, some function buttons and a small display to be able to do testing in the field much easier.

Or even better, take an old adhesive label printer machine (like this: http://www.protoolreviews.com/wp-conten … r/3411.jpg) with an A-Z keyboard, remove the old components and replace with LF / HF antennas, a Raspberry Pi and a Proxmark. Then you can send any command you want to proxmark with the keyboard.

What do you think guys?

Last edited by urkis (2013-09-16 22:36:53)

asper

Contributor

Registered: 2008-08-24

Posts: 1,409

Re: Running on raspberry pi

Very good idea !
Anyway it will be better to have the latest Android compiled revision of the client (now stuck at r653 with no cdc interface supprt ) to really have an extremely portable device! I hope that marcv81 is still here to help, at least with some useful info on how to compile the client for Android if he is too busy to do that !

Last edited by asper (2013-09-17 09:59:22)

asper

Contributor

Registered: 2008-08-24

Posts: 1,409

Re: Running on raspberry pi

Here it is (for Android!).

john duff

Contributor

Registered: 2016-05-30

Posts: 3

Re: Running on raspberry pi

Hi
Last version compiles easily on a raspberry.
I used this guide: http://www.protectors.cc/blog/index.php?/archives/109-Building-the-Raspbery-PI-as-a-Proxmark-3-controller..html
but instead of
svn co http://proxmark3.googlecode.com/svn/trunk@r651 proxmark3-r651 && cd proxmark3-r651/client
I used the new git repository.