Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2014-01-25 06:54:12

fft
Member
Registered: 2014-01-25
Posts: 2

Problems Compiling FPGA Code

Hello,

I tried to compile FPGA code, that needs some software from Xilinx, Xilinx_Vivado_Lin_2013.4_1210_1 contains necessary files. No changes were made on original code. All steps were done as told at https://code.google.com/p/proxmark3/wiki/Linux

$ svn checkout http://proxmark3.googlecode.com/svn/trunk pm3
$ cd pm3
$ pwd
/home/dev/pm3/fpga
$ make
rm -rf fpga.ngc
xst -ifn xst.scr
Release 14.7 - xst P.20131203 (lin64)
Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved.
--> 
ERROR:Xst:1817 - Invalid target architecture 'xc2s30-5-vq100'.

--> 


Total memory usage is 267268 kilobytes

Number of errors   :    1 (   0 filtered)
Number of warnings :    0 (   0 filtered)
Number of infos    :    0 (   0 filtered)

make: *** [fpga.ngc] Error 1
$

Any hints?

best regards
Christian

Offline

#2 2014-01-25 12:07:54

vivat
Contributor
Registered: 2010-10-26
Posts: 332

Re: Problems Compiling FPGA Code

Spartan II fpga support was removed since 11 version of Webpack. So, you need to download version 10.1 of webpack. You can find it on torrent trackers.

Offline

#3 2016-02-19 12:07:23

mariareese
Member
Registered: 2016-02-19
Posts: 1

Re: Problems Compiling FPGA Code

This was helpful for me at some points. Thanku sir .. smile


Virtuoso IT Solutions Pvt. Ltd.

Offline

Board footer

Powered by FluxBB