Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2014-02-18 22:49:01

oldman
Member
Registered: 2014-02-18
Posts: 1

write legic dump back to card

Hi!

I'm not entirely up to date since proxmark firmware revsion ~ 500. Today I have updated the firmware to the latest version and tried to dump and write back dumps to legic cards

proxmark3> hf legic reader
#db# setting up legic card                 
#db# MIM 1024 card found, reading card ...                 
#db# Card read, use 'hf legic decode' or                 
#db# 'data hexsamples 1024' to view results                 

proxmark3> hf legic write 0x00 0x400
#db# setting up legic card                 
#db# MIM 1024 card found, writing 0x000 - 0x400 ...                 
#db# operation aborted @ 0x008

As far as I can remember I was able to write dumps back to cards with the following command:

hf legic write 0x00 0x400

Maybe someone can help me with the error message? I have no idea, same card, same proxmark new error message ;-)

Offline

Board footer

Powered by FluxBB