Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2015-02-12 03:31:28

Earman
Contributor
From: Vancouver, BC Canada
Registered: 2015-01-20
Posts: 45

Cheap casing for the Proxmark3

While visiting a friend in the USA, I found a really good plastic box to make a case for the Proxmark3.

It was only $1.99 at "The Countainer Store" (also available online). Reference # is 10054865. It's made out of soft plastic so it easy to cut ports with a cutter for the USB connections. I did not cut a port for the JTAG nor the button as it is easy easy to just open the lid for that... I attached the board with non conducting 3m double sided tape. Hope this may help someone!

1423708191_sm-proxmark3case.jpg

Offline

#2 2015-02-12 09:34:25

asper
Contributor
Registered: 2008-08-24
Posts: 1,409

Re: Cheap casing for the Proxmark3

Not as good as a "professional" one but it can do the job! Thank you for sharing.

Offline

#3 2015-02-13 02:21:10

Earman
Contributor
From: Vancouver, BC Canada
Registered: 2015-01-20
Posts: 45

Re: Cheap casing for the Proxmark3

asper wrote:

Not as good as a "professional" one but it can do the job! Thank you for sharing.

I agree! But the pro ones where costing about US$29 + shipping to Canada almost doubling that price, so for $1.99 I found it a decent alternative, even though it definitely looks cheap and not professional! My idea was mainly to protect the board from static electricity:)

Last edited by Earman (2015-02-14 04:42:30)

Offline

Board footer

Powered by FluxBB