Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2016-06-09 21:04:02
- nic
- Member
- Registered: 2016-06-09
- Posts: 2
Trouble flashing iceman's fork
I have (2) Proxmark3's that I have tried, at this point, but keep hitting the same wall:
Client works, but when I am trying to flash the bootloader, I get to it saying it is flashing, but it doesn't seem to actually be writing the image. (It is in fact, not)
Here's the output:
Note: Your bootloader does not understand the new START_FLASH command
It is recommended that you update your bootloader
Flashing...
Writing segments for file: bootrom/obj/bootrom.elf
0x00100000..0x001001ff [0x200 / 1 blocks]
Current HW version is:
Can't open logfile, logging disabled!
Prox/RFID mark3 RFID instrument
bootrom: /-suspect 2015-11-19 10:08:02
os: /-suspect 2015-11-19 10:08:09
LF FPGA image built for 2s30vq100 on 2015/02/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/11/ 2 at 9: 8: 8
uC: AT91SAM7S56 Rev B
Embedded Processor: ARM7TDMI
Nonvolitile Program Memory Size: 256K bytes. Used 169916 bytes (65%). Free: 92228 byets (35%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM75xx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
pm3 -->
Offline
#2 2016-06-10 05:43:51
- nic
- Member
- Registered: 2016-06-09
- Posts: 2
Re: Trouble flashing iceman's fork
I fixed this by removing modemmanger.
Offline
#3 2016-06-12 18:20:46
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Trouble flashing iceman's fork
I'm happy you solved this issue. I suggest you edit you first post and add [solved] to the subject
Offline
Pages: 1