Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2009-11-04 02:53:02

elektryk
Contributor
Registered: 2009-09-10
Posts: 43

openpicc, sometimes stops sending data

I have finally get my openpicc. It seems working, but from time to time it stops sending data.
Sometime I got long stream of byte, and after few minutes there are no more bytes in sniff mode. I can do reset, after this I can use menu, but when I enter sniffing mode I get no data (beside of start indicator). After few minut everything is 100% ok.
What can be wrong?
PS problem is with standard receiving and through ssc.

Offline

#2 2009-11-04 02:55:24

elektryk
Contributor
Registered: 2009-09-10
Posts: 43

Re: openpicc, sometimes stops sending data

Addenum:
Field meter is always showing up to ~14-15

Offline

Board footer

Powered by FluxBB