Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2017-03-22 20:42:28
- RiverDev
- Contributor
- Registered: 2017-03-22
- Posts: 3
Introduction
Hi there,
I am a computer science student and newbie to the Proxmark3 v2.
I will be researching electronic LCD concepts for electric ebikes.
I have an idea in-mind to integrate RFID into the LCD. This is a simple concept that will turn on/off the LCD!
I have downloaded the Proxmark Windows Client and I am attempting to test the Proxmark3 v2 by cloning (making a duplicate copy)
of my existing 125KHZ T5557 Keyfob for my apartment.
Where do I start? I would appreciate any help in getting me to step 1.
Offline
#2 2017-03-22 20:51:34
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,505
- Website
Re: Introduction
Welcome to the forums!
I suggest reading forum and wiki as a starting point.
Offline
#3 2017-03-22 20:54:12
- RiverDev
- Contributor
- Registered: 2017-03-22
- Posts: 3
Re: Introduction
What is the link of the wiki? I am open to any suggestions and help!
Offline
#4 2017-03-22 21:59:09
- RiverDev
- Contributor
- Registered: 2017-03-22
- Posts: 3
Re: Introduction
I have a AWID apartment KEY fob and I am trying to make a duplicate copy of my existing FOB. I have used the LF SEARCH command and as per the below results.
Checking for known tags:
AWID Found - BitLength: 26, FC: 101, Card: 24475 - Wiegand: cabf36, Raw: 011d8724bed7711111111111
Valid AWID ID Found!
Note: this is a AWID 125 KHz tag
What do I do next? I would like to learn on how to clone this apartment key using the Proxmark Client software. I apprecaite any help you can offer me.
Offline
#5 2017-03-22 23:57:15
- 0xFFFF
- Administrator
- From: Vic - Australia
- Registered: 2011-05-31
- Posts: 632
Re: Introduction
What is the link of the wiki? I am open to any suggestions and help!
The wiki is located here:
https://github.com/Proxmark/proxmark3/wiki
Information not contained in the wiki is most likely in the forums.
I'm curious, are you familiar with GitHub?
Where did you go looking for the wiki?
Offline
Pages: 1
Topic closed