Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2017-09-15 21:09:25

superPASS
Contributor
Registered: 2017-09-15
Posts: 5

Hiii

I am trying to solve a problem with the android release. If someone could help (I'll post in proper forum) I'd be forever grateful!!

Offline

#2 2017-09-15 21:39:57

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Hiii

Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.

Offline

#3 2017-09-15 22:08:18

superPASS
Contributor
Registered: 2017-09-15
Posts: 5

Re: Hiii

iceman wrote:

Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.

Thanks iceman tongue

I've spent the last week or so playing with my proxmark3. Can copy most cards without problems. Trying to make my setup more portable, but the recent Android release does not work. It says that path independant executables only can be run (PIE). That is the most recent Android version, 2.0.0

I tried to solve that problem in many ways, first by trying to downgrade to below Android 4.1. Then, I found FonkyCorp's version https://github.com/FonkyCorp/proxdroid and tried to compile it myself. After several mitakes, I did managed to compile and install it, however it now says "Sending bytes to proxmark failed - offline." I am guessing my compile is wrong.

I am wondering if anyone can send me a valid compiled version of FonkyCorp's version and/or any Android version. My decide is already rooted + terminal + etc.

Thanks, I can submit a more detailed report if needed.

Offline

Board footer

Powered by FluxBB