Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hi,
I try to read a unknown tag.
To determine if it is hf or lf I used hw tune.
Result of hf search:
pm3 --> hf search
[-]timeout while waiting for reply.
UID :
ATQB : 00 00 00 00 00 00 00
CHIPID : 00
App Data: 00 00 00 00
Protocol: 00 00 00
Bit Rate: 106 kbit/s only PICC <-> PCD
Max Frame Size: 16 bytes
Protocol Type: Protocol is not compliant with ISO/IEC 14443-4
Frame Wait Integer: 0 - 32 ETUs | 302 us
App Data Code: Application is Proprietary
Frame Options: NAD is not supported
Frame Options: CID is not supported
Tag :
Max Buf Length: 0 (MBLI) chained frames not supported
CID : 0
Valid ISO14443-B Tag Found
But the result of hf 14b info is:
pm3 --> hf 14b info
[-]no 14443-B tag found
Any idea how can I be sure which tag is it?
Offline
looks like a fault identification. a lot of zeros.
trace list 14b
Offline
Result of hf 14b list:
pm3 --> hf 14b list
Recorded Activity (TraceLen = 24 bytes)
Start = Start of Start Bit, End = End of last modulation. Src = Source of Transfer
Start | End | Src | Data (! denotes parity error) | CRC | Annotation
------------+------------+-----+-------------------------------------------------------------------------+-----+--------------------
0 | 992 | Rdr |52 | | ?
4175287343 | 4175291715 | Rdr |05 00 08 39 73 | ok | WUPB
Offline
no answer to the wakeup command
I guess, positioning/distance over antenna and also try offical pm3 repo
Offline