Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-03-25 09:51:23

Swadze
Contributor
Registered: 2019-03-24
Posts: 3

Running pm3-bin, version 2.5. and a proxmark 3.

Can someone please point me to where i can find some instructions (or explain to me) how to copy an iclass fob using the above windows software.
I'm able to read it,

proxmark3> hf search
CSN: ff c9 f2 00 fb ff 12 e0           
CC: 8c 87 bb 0d 00 07 01 bb           
    Mode: Application [Locked]         
    Coding: ISO 14443-2 B/ISO 15693         
    Crypt: Secured page, keys not locked         
    RA: Read access not enabled         
  Mem: 2 KBits/2 App Areas (31 * 8 bytes) [1F]         
    AA1: blocks 06-12         
    AA2: blocks 13-1F         
Valid iClass Tag (or PicoPass Tag) Found - Quiting Search


but unsure what the next step is, as there is no clone option.

what info needs to be copied onto the new fob

thanks in advance

Offline

#2 2019-03-27 11:59:49

0xFFFF
Administrator
From: Vic - Australia
Registered: 2011-05-31
Posts: 632

Re: Running pm3-bin, version 2.5. and a proxmark 3.

I have removed your duplicate post. Please don't duplicate your posts or hijack threads.

Offline

Board footer

Powered by FluxBB