Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2019-09-15 15:18:13

Dranked
Contributor
Registered: 2019-09-14
Posts: 16

Flashing Problem / client/flasher: No such file or directory

Hello

Ich recently bought PM3 RDV4.01 complete package. I'm willing to set ip up but it doesn't work. It also gives me this error: client/flasher: No such file or directory
I'm using Windows 10 with ProxSpace 64

[=] Session log C:\Users\t3ch9\Desktop\ProxSpace-64\pm3/.proxmark3/log_20190915.txt
[+] About to use the following files:
[+]     C:\Users\t3ch9\Desktop\ProxSpace-64\msys2\usr\local\bin\../share/proxmark3/firmware/bootrom.elf
[+]     C:\Users\t3ch9\Desktop\ProxSpace-64\msys2\usr\local\bin\../share/proxmark3/firmware/fullimage.elf
[+] Waiting for Proxmark3 to appear on COM3
.....Found
[+] Entering bootloader...
[+] (Press and release the button only to abort )
[+] Waiting for Proxmark3 to appear on COM3
............ Found
[!!] ====================== OBS ! ===========================================
[!!] Note: Your bootloader does not understand the new CMD_BL_VERSION command
[!!] It is recommended that you first update your bootloader alone,
[!!] reboot the Proxmark3 then only update the main firmware

[=] Available memory on this board: UNKNOWN

[!!] ====================== OBS ! ======================================
[!!] Note: Your bootloader does not understand the new CHIP_INFO command
[!!] It is recommended that you first update your bootloader alone,
[!!] reboot the Proxmark3 then only update the main firmware

[=] Permitted flash range: 0x00100000-0x00140000
[+] Loading ELF file C:\Users\t3ch9\Desktop\ProxSpace-64\msys2\usr\local\bin\../share/proxmark3/firmware/bootrom.elf    
[+] Loading usable ELF segments:
[+]    0 : V 0x00100000 P 0x00100000 (0x00000200->0x00000200) [R X] @0x94
[+]    1 : V 0x00200000 P 0x00100200 (0x00000e08->0x00000e08) [R X] @0x298

[+] Loading ELF file C:\Users\t3ch9\Desktop\ProxSpace-64\msys2\usr\local\bin\../share/proxmark3/firmware/fullimage.elf  
[+] Loading usable ELF segments:
[+]    0 : V 0x00102000 P 0x00102000 (0x0003ea10->0x0003ea10) [R X] @0x94
[!!] Error: PHDR is not contained in Flash
[+] All done.

Last edited by Dranked (2019-09-15 15:19:14)

Offline

#2 2019-09-15 19:20:06

iceman
Administrator
Registered: 2013-04-25
Posts: 6,178
Website

Re: Flashing Problem / client/flasher: No such file or directory

What does the output say?   

./pm3-flash-bootrom
./pm3-flash-fullimage
./pm3

If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

#3 2019-09-16 02:13:26

mwalker
Contributor
Registered: 2019-05-11
Posts: 210

Re: Flashing Problem / client/flasher: No such file or directory

Did you try flashing just the boot loader first (as suggested)

[!!] ====================== OBS ! ===========================================
[!!] Note: Your bootloader does not understand the new CMD_BL_VERSION command
[!!] It is recommended that you first update your bootloader alone,
[!!] reboot the Proxmark3 then only update the main firmware

Offline

#4 2019-09-16 17:53:39

Dranked
Contributor
Registered: 2019-09-14
Posts: 16

Re: Flashing Problem / client/flasher: No such file or directory

iceman wrote:

What does the output say?   

./pm3-flash-bootrom
./pm3-flash-fullimage
./pm3

Thanks a lot! Those commands made it to work. But I can't still use the EMV and Smartcard function.

EMV Error:

[=] Channel: CONTACTLESS (T=CL)
[!!] APDU: No APDU response.
[!!] APDU: No APDU response.
[!!] APDU: No APDU response.
[!] Exit...

Smartcard Error:

[!] smart card select failed

Offline

#5 2019-09-16 19:12:40

iceman
Administrator
Registered: 2013-04-25
Posts: 6,178
Website

Re: Flashing Problem / client/flasher: No such file or directory

some tells me you don't like to read instructions...


If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

#6 2019-09-17 07:03:55

Dranked
Contributor
Registered: 2019-09-14
Posts: 16

Re: Flashing Problem / client/flasher: No such file or directory

iceman wrote:

some tells me you don't like to read instructions...

Maybe I missed something. It would be better, when someone could instruct me how to install those 2 modules. Thanks

Last edited by Dranked (2019-09-17 10:13:02)

Offline

#7 2019-09-17 09:41:18

mwalker
Contributor
Registered: 2019-05-11
Posts: 210

Re: Flashing Problem / client/flasher: No such file or directory

I have never used the smart card/sim card bit, so plugged it in today.

First card
[usb] pm3 --> sc info
[!] smart card select failed

With this card, I don't know if the contact bit ever worked, so left it and assumed not working (or there is more to it)

For the 2nd card, got on old pay tv smart card.
- This one found the ATR, so happy the PM3 RDV4 sim and sc is working.

The 3rd card was an old credit card with both contact and contactless.
- Again the ATR was returned.

I did not do anything special here, just pluged in the smart card extension and plug in the smart card and run the sc command.

Offline

#8 2019-09-17 10:12:31

Dranked
Contributor
Registered: 2019-09-14
Posts: 16

Re: Flashing Problem / client/flasher: No such file or directory

I still would like to use the EMV and Smartcard feature. Thanks

Offline

Board footer

Powered by FluxBB