Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2019-11-18 17:49:26
- SecLndn
- Contributor
- Registered: 2019-11-04
- Posts: 4
T55x7 Wipe issue following HID Clone
So... Might be missing something here so apologies first if I am.
Successfully cloned a HID Prox Card using a spare T5577, worked great, card cloned.
Moved onto the next card so wanted to "wipe" the card to progress to the next test.
Carried out successful wipe.
[=] Default configation block 000880E0
[=] Writing page 0 block: 00 data: 0x000880E0
[=] Writing page 0 block: 01 data: 0x00000000
[=] Writing page 0 block: 02 data: 0x00000000
[=] Writing page 0 block: 03 data: 0x00000000
[=] Writing page 0 block: 04 data: 0x00000000
[=] Writing page 0 block: 05 data: 0x00000000
[=] Writing page 0 block: 06 data: 0x00000000
[=] Writing page 0 block: 07 data: 0x00000000
Running lf read, the HID card is still written. Wiped again, lf read again, still written.
After about 4-5 "lf t55xx wipes" the card does wipe....
Any ideas why the card doesn't wipe the first time? It's a proxgrind T5577 by the way that comes with the RDV4
Offline
#2 2019-11-18 19:40:41
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: T55x7 Wipe issue following HID Clone
which antenna do you have to your rdv4? Pull apart case and look on both sides of it.
Offline
#3 2019-11-24 19:57:41
- SecLndn
- Contributor
- Registered: 2019-11-04
- Posts: 4
Re: T55x7 Wipe issue following HID Clone
Iceman Collection Dual Pocket ANT V6.2
Offline