Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2020-04-17 09:04:05
- cosmo61
- Contributor
- From: Sweden
- Registered: 2019-04-04
- Posts: 11
how to determine Hitag types?
Hi
Sorry but i'm not a c-programmer, but it would be nice to have Hitag types in the lf hitag info comand. 
Next last digit in the serial determine the hitag types.
cmdlfhitag.c
// how to detemine Hitag types?
//uid s/n ********
//PCF7936 ******1*
//PCF7941 ******6*
//PCF7942/44 ******4*
//PCF7943 ******5*
//PCF7945 ******9*
//PCF7946 ******2*
//PCF7947 ******3*
//PCF7952 ******7*
Last edited by cosmo61 (2020-04-17 09:05:45)
Offline
#2 2020-04-17 09:15:11
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: how to determine Hitag types?
Cool, I had no idea of that.
[edit] added
Offline
#3 2020-04-17 09:42:02
- cosmo61
- Contributor
- From: Sweden
- Registered: 2019-04-04
- Posts: 11
Re: how to determine Hitag types?
Thanks it looks great
Offline
#4 2020-04-17 09:48:52
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: how to determine Hitag types?
Soon time to look at those datasheets again.
Offline
#5 2020-04-19 15:01:13
- cosmo61
- Contributor
- From: Sweden
- Registered: 2019-04-04
- Posts: 11
Re: how to determine Hitag types?
The lf hitag sniff function would be nice
Offline
#6 2020-04-19 16:42:55
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: how to determine Hitag types?
yup, and the lf hitag sim would also be nice
Offline
#7 2020-04-29 05:51:04
- adameng
- Contributor
- Registered: 2020-04-15
- Posts: 20
Re: how to determine Hitag types?
been testing on this NCF2951 which is latest hitag but still slow progress. i am still struggling to read the wake up request on 125khz also for the PKE
Offline
#8 2020-04-30 17:43:35
- cosmo61
- Contributor
- From: Sweden
- Registered: 2019-04-04
- Posts: 11
Re: how to determine Hitag types?
This is only an Idea.
Disassemble the battery,and check if the backup-transponder is working
in the remote (passive LF for immobilizer).
Fourth-generation keyless entry/go IC (NCF2952/NCF2951)
} Increased sensitivity, 3 channel active LF interface for
125 kHz, 1 channel operation, plus passive LF for immobilizer
backup mode
https://www.nxp.com/docs/en/brochure/75017275.pdf
Last edited by cosmo61 (2020-04-30 17:59:45)
Offline
#9 2020-05-30 09:18:44
- adameng
- Contributor
- Registered: 2020-04-15
- Posts: 20
Re: how to determine Hitag types?
did you manage to get the LF hitag sniff command to work ever ?
Offline
Pages: 1