Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-08-10 19:29:12

sdr_herrmanns
Contributor
Registered: 2017-11-11
Posts: 28

nfc read/writer device with display and buttons

after i am totally disappointed with the proxmarkpro development progress i would like to ask if there exist any ideas with some raspberry device that has a display and buttons to control nfc device plugged in.
i would like to manipulate 4 byte and 7byte uid directly with the device. the buttons should be able to increase or decrease the uid on any point.
up down left right would be nice.
i hoped that some developer would add that to proxmark pro device, which is pretty cool. but nobody is developing anything for it. i have no idea why but it is like it is. even the simple mifare classic is not supported with the original firmware.

Offline

#2 2020-09-07 21:50:17

easyeasy
Contributor
Registered: 2020-09-06
Posts: 10

Re: nfc read/writer device with display and buttons

I thought the same. Can be arduinoed.
But there is not simple UARD communication on USB, there are something called CDC. Needs to be explored.
By the way you can go android with Proxmark3

Offline

Board footer

Powered by FluxBB