Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2021-08-14 19:13:27

DzKmAn
Contributor
Registered: 2020-09-01
Posts: 9

lf em 4x50 chk failed

hello everyone,

I have a problem when I launch the command lf em 4x50 chk

[usb] pm3 --> lf em 4x50 chk
[!] no flash memory available
[usb] pm3 --> lf em 4x50 chk -f my.dic
[!] no flash memory available
[usb] pm3 -->

can you help me

Offline

#2 2021-08-14 23:42:53

iceman
Administrator
Registered: 2013-04-25
Posts: 9,533
Website

Re: lf em 4x50 chk failed

..do you have a RDV4 ?

Offline

#3 2021-08-15 10:36:14

DzKmAn
Contributor
Registered: 2020-09-01
Posts: 9

Re: lf em 4x50 chk failed

non PM3 easy generic

Offline

#4 2021-08-15 10:48:29

iceman
Administrator
Registered: 2013-04-25
Posts: 9,533
Website

Re: lf em 4x50 chk failed

makes sense,  you seem to be running fw/client compiled for RDV4,   rather than the PM3GENERIC platform.
There are clear instructions on the RRG/Iceman repo how to resolve it.   Or if you are using the pre-compiled binaries from proxmarkbuilds,  select the right ones.

Offline

Board footer

Powered by FluxBB