Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.

"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2014-05-19 06:50:15

From: Los Angeles/Scotland
Registered: 2010-08-05
Posts: 70

alternate parts

these parts seem to be drying up.
16Mhz 2-SMD 18pF XTAL ABM2-16.000MHZ-D4Y-T
i goofed, this part is not compatible,the gnd/rst is switched MCP809T-270I/TT instead of the MCP100T , MCP809T-300I/TT for the PM3LCD
G6S-2F-DC5 for the relay, there is also the atq209sa one that is footprint compatible, this one only fits with a small modification.
at91sam7s512b-au also works

Last edited by charliex (2014-05-26 20:52:59)


Board footer

Powered by FluxBB