Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2014-06-09 14:49:18

coolblade
Member
Registered: 2014-06-09
Posts: 2

client running on osx mavericks but keyboard issues

So I was able to get the client (proxmark/client/proxmark3) running on osx mavericks over the weekend but there's some problems. If I point it to an invalid serial port I can type in commands without issue but it then fails saying something like 'unable to send command to device', if I point it to the actual usb serial port (something like /dev/tty000) then it sorta freezes up and I'm unable to type, I can slam the enter key and sometimes the help info appears but it seems to ignore the line breaks. I'm assuming there is something failing silently, is there any logs I should be looking for or perhaps a verbose/debug mode?

Any help is appreciated!

Offline

#2 2014-06-09 14:56:05

coolblade
Member
Registered: 2014-06-09
Posts: 2

Re: client running on osx mavericks but keyboard issues

Here's what I mean by ignoring line breaks when I rapidly hit the enter key.
http://www.dropbox.com/s/x3hjfztanhf7iox/Screenshot%202014-06-09%2014.53.30.png

Offline

#3 2014-07-22 20:39:12

midnitesnake
Contributor
Registered: 2012-05-11
Posts: 151

Re: client running on osx mavericks but keyboard issues

Weird, everything works fine for me on NIX/BSD/OSX have you tried this:
http://penturalabs.wordpress.com/2013/08/11/proxmark3-client-complication-on-osx-10-7/

Last edited by midnitesnake (2014-07-22 20:39:44)

Offline

Board footer

Powered by FluxBB