Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2014-08-08 15:20:09

kevinmitnick
Member
Registered: 2014-08-08
Posts: 6

Calyso card

hi, everybody, i hope that your re fine, i would like if it's possible to hack card Calypso  ISO/CEI 14443,, or clone this card ? i need some informations please, thanks very  much!

Offline

#2 2014-08-11 17:02:29

kevinmitnick
Member
Registered: 2014-08-08
Posts: 6

Re: Calyso card

no  answer; just some help please?thanks

Offline

#3 2014-09-24 17:16:10

bvernoux
Contributor
From: France
Registered: 2014-02-26
Posts: 21

Re: Calyso card

kevinmitnick wrote:

no  answer; just some help please?thanks

I'm pretty sure we can clone it, I could try to sniff it with my HydraBus / HydraNFC board but where to find this card ?

Best Regards
Benjamin

Offline

#4 2014-09-24 17:20:10

iceman
Administrator
Registered: 2013-04-25
Posts: 5,845
Website

Re: Calyso card

Same answer as Bvernoux,   don't have a card to try on.


If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

#5 2014-09-24 18:25:06

asper
Contributor
Registered: 2008-08-24
Posts: 1,409

Re: Calyso card

A friend tried to sniff a calipso card but something went wrong in receiving data back. It should be ISO14443B' and not ISO14443B so something should be different inside the protocol (older one). There is a specific post somewhere in this forum.

Last edited by asper (2014-09-24 18:25:46)

Offline

#6 2014-10-19 15:20:59

Bebeoix
Contributor
Registered: 2014-02-03
Posts: 22

Re: Calyso card

Any news on this ?

Offline

#7 2014-11-27 20:46:38

kevinmitnick
Member
Registered: 2014-08-08
Posts: 6

Re: Calyso card

it's the card for underground in Paris, her name is navigo, i think it's very difficult to clone this card

Offline

#8 2015-02-09 13:56:00

Atttif
Member
Registered: 2015-02-09
Posts: 1

Re: Calyso card

You could try to use the iclass snoop function in the recent proxmark firmware.
It uses the same modulation and encoding, although the protocol/crc is different, in principle it should be possible to capture (raw) frames.You could try to use the iclass snoop function in the recent proxmark firmware.
It uses the same modulation and encoding, although the protocol/crc is different, in principle it should be possible to capture (raw) frames.


Atttifff
tongue

Offline

#9 2015-02-09 15:05:16

asper
Contributor
Registered: 2008-08-24
Posts: 1,409

Re: Calyso card

Atttif wrote:

You could try to use the iclass snoop function in the recent proxmark firmware.
It uses the same modulation and encoding, although the protocol/crc is different, in principle it should be possible to capture (raw) frames.You could try to use the iclass snoop function in the recent proxmark firmware.
It uses the same modulation and encoding, although the protocol/crc is different, in principle it should be possible to capture (raw) frames.


iclass snoop can be used to snoop ISO15693 protocol, not ISO14443AorB; to snoop ISO14443AorB there is a specific command.

If the protocol is ISO14443B' (as Calypso can be B') no snooping method will be correct because ISO14443B' is not a free-documented protocol (no datasheets available until now).

Last edited by asper (2015-02-09 15:08:16)

Offline

Board footer

Powered by FluxBB