Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2015-03-07 14:28:54

raoul170
Contributor
Registered: 2015-02-23
Posts: 5

Eagle to gerber

Can anyone help me to convert to gerber? The gerber located at http://www.proxmark.org/files/J.Westhues/proxmark3-mfgr-data.zip  are not accepted by my chosen pcb guys.


Need it in gerb274x-4layer.cam  format....

Offline

Board footer

Powered by FluxBB