Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
HI,
May I ask you if, according to you, the antenna extracted from an rfid tag could be used as ana antenna with the proxmark please ?
I need to sniff communication in a very short place, could it be a solution ?
Thnak you very much
Have a nice day
Offline
Frequency depends on the capacitor coupled with the antenna so i don't think it will be a good solution.
Offline
thank you very much Asper,
I would like to sniff communication between reader and tag but the room is quite tiny (10 mm * 40 mm) ?
Have you ever heard about something that could you the job please ?
Thank you very much for the help
Have a nice day
Skappy
Last edited by skappy (2015-06-07 15:33:53)
Offline
You need to test/sniff the tag against a normal reader and build yourself an antenna with the size you mentioned and test various configurations/swirl numbers.
Offline
Thx Asper,
Do we have any idea about the value of the inductance of the PM3 antenna please ?
I will try to build it by myself but i'm looking for the inductance value that shouldbe reached...
Thx a lot
Offline
skappy, I have been trying to find a similar solution for quite some time now. Is there anyways that we could achieve this without having to modify an antenna embedded in any current products, if not RFID tags, perhaps something else. I was hoping that you have experimented with communication within small spaces already.
Regards,
Mert Cilek
http://blog.7pcb.com
Offline