Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2016-09-11 10:33:50

spaceteddy
Contributor
Registered: 2016-09-10
Posts: 17

OS X 10.11.6 CDC driver slowly

Dear friends,

Well, I'm using El Capitan now and I try to get the proxmark3 "easy" running in a way that it is usable.
My topic is that as I connected the proxmark3 to the MacBook the first time it looks like that the system works well out of the box. It was recognized immediately and flashing of the boot loader and fullimage was not an issue. Everything was fine.
The client SW workes, but speed of USB communication is worse and it is really often, that the connection hangs with the CDC modem USB driver.
It doesn't matter if I use OS X or Ubuntu in a VM.
It seems that in the first 10 seconds the communication is fine, but then it becomes unstable.

Has somebody made the same experience and worked out a solution?

I tried to patch my system with an older Apple cdc driver, but it seems that my modem connection is dead now sad(
If somebody knows how to reinstall the original Apple cdc USB driver, I would be happy :)thanks a lot

Regds,

bob

Offline

#2 2016-09-15 21:45:42

spaceteddy
Contributor
Registered: 2016-09-10
Posts: 17

Re: OS X 10.11.6 CDC driver slowly

Ok, I be done the upgrade to Sierra and the issue is gone now.

Thanks

Offline

Board footer

Powered by FluxBB