Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2017-01-12 13:56:34

Tiberius
Contributor
Registered: 2017-01-12
Posts: 33

New User says hello!

Hello to the community!

I am relatively new to the project. I am interested in understanding the proxmark code and modifying it for some home projects. At the moment I work with old car key transponders and try to figure out what modulation scheme they use.

If anyone has sources that give a good overview how the proxmark3 code is organized, I would be very thankful.
So far I have discovered the "How to train your RFID hacking tool" (https://github.com/op7ic/defcon-23-slides-only/blob/master/DEF%20CON%2023%20presentations/Speaker%20%26%20Workshop%20Materials/Craig%20Young/DEFCON-23-Craig-Young-How-To-Train-Your-RFID-Hacking-Tools.pdf) and some doctoral thesis's on the Mifare project (http://proxmark.org/files/Documents/13.56%20MHz%20-%20MIFARE%20Classic/).

But if anyone knows any recent documentation on the proxmark3 code that would be great!

Cheers
Stephan

Offline

#2 2017-01-12 15:55:08

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: New User says hello!

Welcome to the forums!

Offline

Board footer

Powered by FluxBB