Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2017-02-05 11:25:11

vishal36
Contributor
Registered: 2017-02-03
Posts: 18

Windows 10 64bit driver installation issue

I bought Proxmark3 V3(http://www.emartee.com/product/42308/Proxmark3%20V3.0%20DEV%20Easy%20Kits) and having tough time install the drivers on windows 10.

I am running a windows 10 home edition 64bit system.

I downloaded the Windows 10 driver from internet and even asked the seller for windows 10 driver but I keep getting the below error.
Before installing I turned off the driver signature authentication.

"The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64-based system." Error

I know I updated the right usb device in the Human interface devices list as it goes away and comes back when i disconnect / plug in the proxmark3

I found a post for the same error for Windows 7 but the step listed for it doesn't work for windows 10 -  http://www.proxmark.org/forum/viewtopic.php?pid=4584#p4584 


Please help.

Offline

#2 2017-02-05 20:56:45

vishal36
Contributor
Registered: 2017-02-03
Posts: 18

Re: Windows 10 64bit driver installation issue

Can someone  help please

Offline

#3 2017-02-06 02:36:22

Danz
Contributor
From: Dubai
Registered: 2015-10-24
Posts: 98

Re: Windows 10 64bit driver installation issue

What is the name of the driver file you got ?!

It should be .inf, try installing v2 drivers , it shall work fine as well in theory btw.

Offline

#4 2017-02-06 04:28:26

vishal36
Contributor
Registered: 2017-02-03
Posts: 18

Re: Windows 10 64bit driver installation issue

Danz wrote:

What is the name of the driver file you got ?!

It should be .inf, try installing v2 drivers , it shall work fine as well in theory btw.


The file name is called Proxmark3.inf
I tried v2 and v3 drivers are same I think as I have tried few version, but still get the same error.

Offline

#5 2017-02-06 10:17:26

vishal36
Contributor
Registered: 2017-02-03
Posts: 18

Re: Windows 10 64bit driver installation issue

Can someone please help, I need the device working urgently sad

Offline

#6 2017-02-06 10:48:29

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Windows 10 64bit driver installation issue

Sorry,  on my win10, 64bit, I disabled the driver signature (those new blue screens and reboots) and installed it afterwards by pointing to .inf file when "update driver" / "have disk" for my PM3 device.   

using the one on GitHub. https://github.com/Proxmark/proxmark3/t … ter/driver

Offline

#7 2017-02-06 11:05:14

vishal36
Contributor
Registered: 2017-02-03
Posts: 18

Re: Windows 10 64bit driver installation issue

iceman wrote:

Sorry,  on my win10, 64bit, I disabled the driver signature (those new blue screens and reboots) and installed it afterwards by pointing to .inf file when "update driver" / "have disk" for my PM3 device.   

using the one on GitHub. https://github.com/Proxmark/proxmark3/t … ter/driver


I did disable the driver signature to start with.
when i open the github link I see two options.
-77-mm-usb-device-blacklist.rules
-proxmark3.inf

I clicked on both which opened separate pages with some sort of codes... but couldnt see a download file.

Sorry I am very new to this.

Last edited by vishal36 (2017-02-06 11:09:30)

Offline

#8 2017-02-06 11:09:45

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Windows 10 64bit driver installation issue

I'm afraid I can't help you.

Offline

#9 2017-02-06 11:52:50

vishal36
Contributor
Registered: 2017-02-03
Posts: 18

Re: Windows 10 64bit driver installation issue

iceman wrote:

I'm afraid I can't help you.

ok got the driver to install, apart from the driver is there anything else I need to install? I only need to copy cards.

Last edited by vishal36 (2017-02-06 11:53:13)

Offline

#10 2017-02-06 12:40:25

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Windows 10 64bit driver installation issue

Do take time to read the instructions on Wiki https://github.com/Proxmark/proxmark3/wiki/Windows

Offline

#11 2017-02-06 19:43:37

vishal36
Contributor
Registered: 2017-02-03
Posts: 18

Re: Windows 10 64bit driver installation issue

iceman wrote:

Do take time to read the instructions on Wiki https://github.com/Proxmark/proxmark3/wiki/Windows


Thanks heaps iceman, another silly question, the link to the windows wiki is for windows7, are the steps same for windows 10 as well also,do I need to follow the steps for " Development environment installation"?

Offline

#12 2017-02-06 19:52:02

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Windows 10 64bit driver installation issue

If you want to compile / use the latest sourcecode from Github, then yes.

If you have linux, Mac or docker you can use that instead of installing the Mingw environment for Windows.

It comes down to what you are comfortable with,  but the instructions are the same for Win 7 / Win 10.

Offline

#13 2017-02-06 19:55:56

vishal36
Contributor
Registered: 2017-02-03
Posts: 18

Re: Windows 10 64bit driver installation issue

iceman wrote:

If you want to compile / use the latest sourcecode from Github, then yes.

If you have linux, Mac or docker you can use that instead of installing the Mingw environment for Windows.

It comes down to what you are comfortable with,  but the instructions are the same for Win 7 / Win 10.


what do you mean by compile? what am I compiling and why do we compile. sorry you probably thinking I am retarded

Offline

#14 2017-02-06 20:05:30

vishal36
Contributor
Registered: 2017-02-03
Posts: 18

Re: Windows 10 64bit driver installation issue

and is the pm3-bin-2.5.0 on github the firmware for windows 10 ?

Offline

#15 2017-02-06 21:36:28

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Windows 10 64bit driver installation issue

I see,  lets no compile then.

Read the first post  http://www.proxmark.org/forum/viewtopic.php?id=3975
Read wiki on how to flash, use the client...

Good luck!

Offline

#16 2018-05-30 07:37:28

HEK
Contributor
Registered: 2018-05-29
Posts: 2

Re: Windows 10 64bit driver installation issue

Hi! I am having the same issue.
Could you please share how you solve the "The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64-based system." Error?
Many thanks!

EDIT
Problem solve! Silly me, I was trying to update the usb connection and not the port. Hope it will help others if they are getting the same error.

Last edited by HEK (2018-05-30 09:33:31)

Offline

Board footer

Powered by FluxBB