Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2017-03-06 12:24:54
- Chops
- Contributor
- Registered: 2017-03-05
- Posts: 1
Chops - new user from Australia
Hi,
I'm a new user. I had an RFID implanted in my hand last week, and was excited to see my Proxmark3 arrive today (a cheap version from AliExpress, hope that doesnt offend anyone!)
I went through the fairly laborious process of downloading, installing drivers in Win10, and finally connecting to the device. I was pretty stoked to get the first valid response to an 'hw version' command!
After a bit of experimenting with distance, I was able to read my Indala card (work access card), write it to a T5577 test card, read it back, and then finally write to my implant. I was able to read back from my hand sucessfully once, although it seems to be a bit finicky with distance (probably a less than ideal antenna).
I think I'll be at work bright and early tomorrow to see if I can open any doors!
Offline
#2 2017-03-06 14:39:10
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Chops - new user from Australia
Welcome to the forums!
Offline
#3 2017-04-05 09:04:07
- slmann101
- Contributor
- Registered: 2017-03-30
- Posts: 33
Re: Chops - new user from Australia
May I ask what type of chip you got in your hand?
Offline
Pages: 1
Topic closed