Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2017-03-25 11:06:05

bryann
Contributor
Registered: 2017-03-24
Posts: 2

I Can't clone my RFID Card

Hi,

I here because I need your help. This is my problem:
I want copy my RFID card but i can't. When I do "mf chk *1 ? d" I have this message:
"Found keys have been dumped to file dumpkeys.bin. 0xffffffffffff has been inserted for unknown keys  "
And I'm a little loose

Can you help me? because before I worked with OSx now I use Kali. And before It's work normally.

For information I follow this tutorial http://bouzdeck.com/rfid/32-cloning-a-mifare-classic-1k-tag.html

Thank's for your help

Offline

#2 2017-03-25 12:16:49

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: I Can't clone my RFID Card

I believe that system has detection for magic generat 1a tags.

If you can sniff the traffic between reader/card with yr proxmark3 and post the trace here it would be great.
on PM3 master you can use these commands:
hf 14a snoop
hf mf sniff

Offline

Board footer

Powered by FluxBB