Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2017-04-20 17:11:41
- proxmark10
- Contributor
- Registered: 2017-04-03
- Posts: 10
devkitARM really needed?
Hi,
following the link below to build the firmware
https://github.com/Proxmark/proxmark3/wiki/Ubuntu-Linux#Reflashing_Proxmark3
I wonder if the devkitARM is really necessary.
The build was done even if the devkitARM step was skipped.
I work on Ubuntu 16.04, and already installed the gcc cross compiler.
thanks
Offline
#2 2017-04-20 17:27:59
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: devkitARM really needed?
does your dev-env build the fullimage after make clean && make all ? if so, then you don't need to install it.
Offline