Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2017-07-11 00:58:51

xugmu
Contributor
Registered: 2016-06-22
Posts: 24

My proxmark has stopped working

After moving from

bootrom: /-suspect 2015-11-04 22:15:34
os: /-suspect 2015-11-04 22:15:41

to

bootrom: /-suspect 2015-11-04 22:15:34
os: iceman/master/v1.1.0-2055-g4d189095 2017-06-27

My pm3 has stopped working, even if the client acknowledges it the instructions do nothing

Of course I've tried reflashing it with all the possible images and there is no way

The question could be: Do I already ask the pirate bus or not?


Best  regards

Last edited by xugmu (2017-07-11 01:00:55)

Offline

#2 2017-07-11 14:23:25

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: My proxmark has stopped working

while this question has been answered many many times now, you need to hold the button and flash the corresponding bootrom to the code you flashed your arm from.  (you might need to check the com port as it may change.)

Offline

#3 2017-07-11 15:22:59

xugmu
Contributor
Registered: 2016-06-22
Posts: 24

Re: My proxmark has stopped working

Thank you very much Marshmellow

Promak has returned to normal

I promise to read more next time

Best  regards

Last edited by xugmu (2017-07-17 21:07:06)

Offline

Board footer

Powered by FluxBB