Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2017-09-08 05:20:15

Rfidman
Contributor
Registered: 2017-09-08
Posts: 6

Hi !!!!!

Hi I'm from Argentina, I bought the Proxmark3 rdv2 kit, and I'm interested in learning and experimenting with RFID. Hello to everyone.

Offline

#2 2017-09-08 06:50:19

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Hi !!!!!

Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.

Offline

#3 2017-09-08 08:05:56

Rfidman
Contributor
Registered: 2017-09-08
Posts: 6

Re: Hi !!!!!

i read it, thank you.
My first project, is to clone a nexkey card, where you suggest me, to publish my questions?

Offline

#4 2017-09-08 08:37:46

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Hi !!!!!

I suggest you ask questions in the appropriate category.

Offline

#5 2017-09-08 13:45:44

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: Hi !!!!!

Nexkey should be LF so the low frequency section is correct.  But there are a couple topics on that key you should review to see if they answer your questions.  Search the forum.  If I get time I may get the link...

Offline

#6 2017-09-08 18:06:47

Rfidman
Contributor
Registered: 2017-09-08
Posts: 6

Re: Hi !!!!!

Thank you Marshmellow, I've been reading several posts from this forum, but I didn't get what I needed.
I'll have to create a new post.

Offline

Board footer

Powered by FluxBB