Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2017-09-08 05:20:15
- Rfidman
- Contributor
- Registered: 2017-09-08
- Posts: 6
Hi !!!!!
Hi I'm from Argentina, I bought the Proxmark3 rdv2 kit, and I'm interested in learning and experimenting with RFID. Hello to everyone.
Offline
#2 2017-09-08 06:50:19
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Hi !!!!!
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Offline
#3 2017-09-08 08:05:56
- Rfidman
- Contributor
- Registered: 2017-09-08
- Posts: 6
Re: Hi !!!!!
i read it, thank you.
My first project, is to clone a nexkey card, where you suggest me, to publish my questions?
Offline
#4 2017-09-08 08:37:46
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Hi !!!!!
I suggest you ask questions in the appropriate category.
Offline
#5 2017-09-08 13:45:44
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Hi !!!!!
Nexkey should be LF so the low frequency section is correct. But there are a couple topics on that key you should review to see if they answer your questions. Search the forum. If I get time I may get the link...
Offline
#6 2017-09-08 18:06:47
- Rfidman
- Contributor
- Registered: 2017-09-08
- Posts: 6
Re: Hi !!!!!
Thank you Marshmellow, I've been reading several posts from this forum, but I didn't get what I needed.
I'll have to create a new post.
Offline
Pages: 1
Topic closed