Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2017-12-03 05:28:02

anarchywon
Contributor
Registered: 2017-12-03
Posts: 2

Hello y'all

Hello y'all
I have been lurking for about 3 months now so I thought it was time to make a account, (when I signed up it said I needed to do a intro post so here it is)
my background is physical security with a interest in RFID and electronics.
I am hope to learn alot here. 

I was following the wiki and bricked my Proxmark3 (its a cheaper "easy" model) so I dugout my bus-pirate and am in the process of fixing it (see I am already learning something new).

once I have my Proxmark3 up and running I am sure I will have lots of questions.

Offline

#2 2017-12-03 07:55:16

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Hello y'all

Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.

Offline

#3 2017-12-03 20:20:51

anarchywon
Contributor
Registered: 2017-12-03
Posts: 2

Re: Hello y'all

thanks for the welcome iceman, I am still reading all the links from that post smile
by chance is there anything like a "RFID/Proxmark3 for dummies" book I should be reading so I can get a better understanding of the subject?

Offline

#4 2017-12-03 20:57:15

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Hello y'all

nop.  the wiki is a good start.

Offline

Board footer

Powered by FluxBB