Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2017-11-10 06:21:40
- jpsmith888
- Contributor
- Registered: 2017-11-09
- Posts: 7
New User: Struggling to Get runme.bat to run
Hi everyone,
I'm trying to set up my Proxmark3 and I'm running into issues when I try to run "runme.bat" . The error I am getting in the windows command prompt is:
"mkdir: cannot create directory `/pm3': Permission denied
cp: cannot create regular file `/pm3/.inputrc': No such file or directory
sh.exe": cd: /pm3: No such file or directory"
I tried running it through GIT bash and got:
"$ source runme.bat
bash: @echo: command not found
bash: REM: command not found
bash: REM: command not found
bash: REM: command not found
bash: msys/etc/fstab: Permission denied
bash: msys/etc/fstab: Permission denied
bash: msys/etc/fstab: Permission denied
bash: msysmsys.bat: command not found"
The location of ProxSpace-master on my computer is: "C:\Users\RF_Research\ProxSpace-master"
I'm logged in as the administrator on my laptop so I don't know where this denial of access is coming from. Before I had ProxSpace in the location "C:\Users\John Smith\Documents\RF_Research" But I was running into issues because the "John Smith" folder (who's name is not directly editable) has a space in it.
Don't know THAT much about programming, computers, or Github and any help would be so appreciated.
Offline
#2 2017-11-10 08:20:12
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: New User: Struggling to Get runme.bat to run
Don't run it through Git BASH.
You should run it from cmd.exe, the old built-in windows command shell.
The pm3 will be a taunting experince for you, but the reward will be bigger 
You can do it.
Offline
#3 2018-02-04 11:44:24
- YoungJules
- Contributor
- Registered: 2012-01-29
- Posts: 60
Re: New User: Struggling to Get runme.bat to run
First error you got was not through git bash, right?
You got the permission error, then tried git bash?
As iceman says, don't run it through git bash, but if you're getting permission errors running it via cmd.exe, try putting the runme.bat somewhere you know you have permission to write to... like My Documents or so. Failing that, perhaps trying opening cmd.exe as Administrator?
Offline