Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2018-10-09 00:27:40

blkonblk17
Contributor
Registered: 2018-10-07
Posts: 4

Does anyone know how I can Emulate EM410x LF Tags in Standalone mode??

I've updated my Firmware to the latest one and there was an edit released earlier today which made changes to the Makefile to support LF standalone emulating but unfortunately it does not read EM410x LF tags in Standalone mode. It does however read LF tags/cards like the T5577 and HID. I found a thread started by @zSec last year where a fix was apparently found however, there was no further info on it. I would appreciate any help from the community.Thanks to everyone in advance.This is what I installed earlier today, https://github.com/exploitagency/github-proxmark3-standalone-lf-emulator

Offline

Board footer

Powered by FluxBB