Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2018-11-08 17:24:16

gtaure0953
Contributor
Registered: 2018-11-07
Posts: 3

How to put the access card

Hello, my card is
proxmark3> hf 14a reader
ATQA : 00 04         
UID : cf cd 50 a5           
SAK : 28 [1]         
TYPE : JCOP31 or JCOP41 v2.3.1         
ATS : 13 78 80 82 02 80 31 80 66 b0 84 0c 01 6e 01 83 00 90 00 a8 ac           
       -  TL : length is 19 bytes         
       -  T0 : TA1 is present, TB1 is present, TC1 is present, FSCI is 8 (FSC = 256)         
       - TA1 : different divisors are NOT supported, DR: [], DS: []         
       - TB1 : SFGI = 2 (SFGT = 16384/fc), FWI = 8 (FWT = 1048576/fc)         
       - TC1 : NAD is NOT supported, CID is supported         
       -  HB : 80 31 80 66 b0 84 0c 01 6e 01 83 00 90 00           
Answers to chinese magic backdoor commands: NO     

13.56Mhz高频卡操作
类型:JCOP31ORJCOP41V2.3.1

I tried many times. I can't l information to it. I want to ask how to write it. Thank you.
How to put the access card

Last edited by gtaure0953 (2018-11-08 17:26:39)

Offline

Board footer

Powered by FluxBB