Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2018-11-10 10:54:54

mike
Member
Registered: 2018-10-11
Posts: 22

block 0 isok:00

Hi,everytime when i do hf mf restore 1 then i see writing to block 0 isok:00 But all the other blocks isok:01.Can somebody tell me the problem.

Offline

#2 2018-11-10 14:32:53

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: block 0 isok:00

Block 0 is read-only on standard cards. It therefore cannot be restored.

Offline

#3 2018-11-10 17:06:25

mike
Member
Registered: 2018-10-11
Posts: 22

Re: block 0 isok:00

So that mean that the card don't work if block 0 is not restored?

Offline

Board footer

Powered by FluxBB