Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2019-02-04 06:24:36
- childs999
- Contributor
- Registered: 2019-01-28
- Posts: 5
Cloning Hitag2 RFID cards - a few questions
Hi
Apologies if this has already been posted.. I did a fairly thorough search of the pm3 forums.
I haven't been able to find much information online regarding HITAG2 RFID cards (there seems to be a LOT of information on the transponders though!) and pm3 support. Maybe I haven't looked in the right place yet..
Is anyone able to point me in the direction of any useful articles/posts?
I currently understand the following about Hitag2 RFID cards:
* Hitag2 RFID cards can use 2 modes: crypto mode and password mode. Their is a default password (saw this from a video on RFIDler)
Does the pm3 have attacks against both modes (brute-force passwords, etc)? If I was able to obtain a hitag2 RFID card, how would I determine which mode it is in?
Thanks
childs999
Last edited by childs999 (2019-02-04 06:24:50)
Offline
#2 2019-02-04 07:19:52
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Cloning Hitag2 RFID cards - a few questions
*moved*
Offline
#3 2019-02-04 11:39:42
- childs999
- Contributor
- Registered: 2019-01-28
- Posts: 5
Re: Cloning Hitag2 RFID cards - a few questions
*moved*
Thanks Iceman, clearly posted this in the wrong area!
Offline