Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2019-03-08 08:44:34

yukihama
Contributor
Registered: 2018-05-13
Posts: 65

PM3 cant read iclass card with statrting symbol “+”?help wanted???

I got several iclass card with a + in front of the serial no. Most of the cards were with an *

On my PM3 RDV2, the card cannot be read and prompted "no known/supported 13.56 MHz tags found

Does anyone knows why PM3 is unable to read this type of new iclass + card ?


[ARM ]
bootrom: iceman/master/ice_v3.1.0-568-ge09d5385 2018-02-14 15:55:18
      os: iceman/master/ice_v3.1.0-568-ge09d5385 2018-02-14 15:55:24
[ FPGA ]
LF image built for 2s30vq100 on 2017/10/25 at 19:50:50
HF image built for 2s30vq100 on 2017/11/10 at 19:24:16

Offline

#2 2019-03-08 11:09:15

Wyjec
Contributor
Registered: 2018-06-02
Posts: 9

Re: PM3 cant read iclass card with statrting symbol “+”?help wanted???

Good question! I also asked about this, but still no help but:< btw I didn't know that this problem is associated with new serial no. How can I check that?

Offline

Board footer

Powered by FluxBB