Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-04-14 08:34:08

mabtux
Contributor
Registered: 2019-02-25
Posts: 10

[SOLVED] [RDV4] Compiled but errors

Bonjour
I have compiled and intalled my proxmak3 dev4. But i have errors when use the engine.
command : dmesg | grep -i usb   
....
[ 7394.964703] usb 8-2: new full-speed USB device number 2 using ohci-pci
[ 7395.167770] usb 8-2: New USB device found, idVendor=9ac4, idProduct=4b8f, bcdDevice= 1.00
[ 7395.167778] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7395.167782] usb 8-2: Product: proxmark3
[ 7395.167786] usb 8-2: Manufacturer: proxmark.org
[ 7395.167789] usb 8-2: SerialNumber: iceman
[ 7395.170026] cdc_acm 8-2:1.0: ttyACM1: USB ACM device


So I think there is no error, no need to flash it.

/home/mabtux/proxmark3/client# ./proxmark3 ./dev/ttyACM0
ERROR: invalid serial port
Qt: Session management error: None of the authentication protocols specified are supported
proxmark3>

Can you help me please ?
what is this qt session mangement error ?
I am on kali . All steps worked fine until this one.

Last edited by mabtux (2019-04-14 08:41:26)

Offline

#2 2019-04-14 09:01:28

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: [SOLVED] [RDV4] Compiled but errors

... your output say ttyACM1  and you call the client with ttyACM0

Offline

#3 2019-04-14 09:11:27

mabtux
Contributor
Registered: 2019-02-25
Posts: 10

Re: [SOLVED] [RDV4] Compiled but errors

Thank's for the help and the speed of answer andd tolerate my bad english:

./proxmark3 /dev/ttyACM0
Qt: Session management error: None of the authentication protocols specified are supported
Prox/RFID mark3 RFID instrument         
[ ARM ]
bootrom: Version information not available
      os: Version information not available

[ FPGA ]
LF image built for 2s30vq100 on 2018/ 9/ 8 at 13:57:51
HF image built for 2s30vq100 on 2018/ 9/ 3 at 21:40:23         
uC: AT91SAM7S512 Rev A         
Embedded Processor: ARM7TDMI         
Nonvolatile Program Memory Size: 512K bytes. Used: 245529 bytes (47%). Free: 278759 bytes (53%).         
Second Nonvolatile Program Memory Size: None         
Internal SRAM Size: 64K bytes         
Architecture Identifier: AT91SAM7Sxx Series         
Nonvolatile Program Memory Type: Embedded Flash Memory 



bootrom version not avaible
os version not avaible

Offline

#4 2019-04-14 09:14:48

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: [SOLVED] [RDV4] Compiled but errors

see previous answer

Offline

#5 2019-04-14 09:16:30

mabtux
Contributor
Registered: 2019-02-25
Posts: 10

Re: [SOLVED] [RDV4] Compiled but errors

I have seen my error , and rebooted all the system , puted on the engine in the good usb port. 5.2 for me .
Always with the good command : cd client  and ./proxmark3  /dev/ttyACM0
:
proxmark3> hw tune

Measuring antenna characteristics, please wait...         
# LF antenna:  4,50 V @   125.00 kHz         
# LF antenna: -3597795,33 V @   134.00 kHz         
# LF optimal: 295043,07 V @   125,00 kHz         
# HF antenna: 47,44 V @    13.56 MHz         
Displaying LF tuning graph. Divisor 89 is 134khz, 95 is 125khz.
         

         
proxmark3> X Error: BadAccess (attempt to access private resource denied) 10
  Extension:    130 (MIT-SHM)
  Minor opcode: 1 (X_ShmAttach)
  Resource id:  0x474
X Error: BadShmSeg (invalid shared segment parameter) 128
  Extension:    130 (MIT-SHM)
  Minor opcode: 5 (X_ShmCreatePixmap)
  Resource id:  0x2800010
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800011
X Error: BadAccess (attempt to access private resource denied) 10
  Extension:    130 (MIT-SHM)
  Minor opcode: 1 (X_ShmAttach)
  Resource id:  0x474
X Error: BadShmSeg (invalid shared segment parameter) 128
  Extension:    130 (MIT-SHM)
  Minor opcode: 5 (X_ShmCreatePixmap)
  Resource id:  0x2800012
X Error: BadPixmap (invalid Pixmap parameter) 4
  Major opcode: 54 (X_FreePixmap)
  Resource id:  0x2800011
X Error: BadShmSeg (invalid shared segment parameter) 128
  Extension:    130 (MIT-SHM)
  Minor opcode: 2 (X_ShmDetach)
  Resource id:  0x2800010
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800013
X Error: BadAccess (attempt to access private resource denied) 10
  Extension:    130 (MIT-SHM)
  Minor opcode: 1 (X_ShmAttach)
  Resource id:  0x146
X Error: BadShmSeg (invalid shared segment parameter) 128
  Extension:    130 (MIT-SHM)
  Minor opcode: 5 (X_ShmCreatePixmap)
  Resource id:  0x2800014
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800015
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800015
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800013
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800013
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800015
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800013
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800015
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800015
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800013
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800013
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800013
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800013
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800013
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800013
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800013
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800015
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x2800013

Last edited by mabtux (2019-04-14 09:20:10)

Offline

#6 2019-04-14 09:17:16

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: [SOLVED] [RDV4] Compiled but errors

Let me suggest that you use this script instead.

/home/mabtux/proxmark3/# ./proxmark3.sh

Offline

#7 2019-04-14 09:46:59

mabtux
Contributor
Registered: 2019-02-25
Posts: 10

Re: [SOLVED] [RDV4] Compiled but errors

No, *
I dont use it

Offline

#8 2019-04-17 16:40:40

mabtux
Contributor
Registered: 2019-02-25
Posts: 10

Re: [SOLVED] [RDV4] Compiled but errors

Bonjour,

iceman wrote:

Let me suggest that you use this script instead.

/home/mabtux/proxmark3/# ./proxmark3.sh

This command answer nothing.
But:
/home/mabtux/proxmark3/client# ./proxmark3  /dev/ttyACM0         as command has this prompt:

Qt: Session management error: None of the authentication protocols specified are supported
Prox/RFID mark3 RFID instrument         
[ ARM ]
bootrom: Version information not available
      os: Version information not available

[ FPGA ]
LF image built for 2s30vq100 on 2018/ 9/ 8 at 13:57:51
HF image built for 2s30vq100 on 2018/ 9/ 3 at 21:40:23         
uC: AT91SAM7S512 Rev A         
Embedded Processor: ARM7TDMI         
Nonvolatile Program Memory Size: 512K bytes. Used: 245529 bytes (47%). Free: 278759 bytes (53%).         
Second Nonvolatile Program Memory Size: None         
Internal SRAM Size: 64K bytes         
Architecture Identifier: AT91SAM7Sxx Series         
Nonvolatile Program Memory Type: Embedded Flash Memory

So, dear "compagnons" I thik that i have my own problem with qt, but no answer for that. I know that done : aptitude update; aptitude upgrade before compiling proxmark3.
I think that my system needs QT5. No ?
Help please..

Offline

#9 2019-04-17 16:46:31

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: [SOLVED] [RDV4] Compiled but errors

Since I doubt you followed the instructions, I will link it here again.
https://github.com/RfidResearchGroup/pr … uctions.md

Offline

#10 2019-04-17 17:15:03

mabtux
Contributor
Registered: 2019-02-25
Posts: 10

Re: [SOLVED] [RDV4] Compiled but errors

On terminal, the Engine is in good fonction. I have obtained the dump of a Mifare classic tag easily.

Offline

#11 2019-04-17 23:10:33

mabtux
Contributor
Registered: 2019-02-25
Posts: 10

Re: [SOLVED] [RDV4] Compiled but errors

iceman wrote:

Since I doubt you followed the instructions, I will link it here again.
https://github.com/RfidResearchGroup/pr … uctions.md

thank you !
i will answer the results...
In first i have folowed this one :  https://github.com/Proxmark/proxmark3/wiki/Kali-Linux

Offline

#12 2019-04-19 22:50:53

mabtux
Contributor
Registered: 2019-02-25
Posts: 10

Re: [SOLVED] [RDV4] Compiled but errors

Bonsoir Evryboddy

My problemis with qt. I must solve it before; I think that it's possible to run qt5base. On Kali. Second problem, i have not removed modulemanager.
But on windows, all works fine. One problem i am fanatic opensource and unix-linux.
But thank you, iceman, that is suffisant now for my tests. I will do that in one week. Ubuntu and kali.

Offline

#13 2019-07-13 10:38:58

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: [SOLVED] [RDV4] Compiled but errors

I get the feeling you didn't follow the setup / compilation / flashing / running instructions for your OS.   I also think you didn't use RRG/Iceman repo on your rdv4 leading to more troubles.

You find it here
RRG/Iceman repo  https://github.com/RfidResearchGroup/proxmark3

It has very good updated guides / documentation and it works on all devices not just rdv4.

Offline

Board footer

Powered by FluxBB