Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2019-05-14 07:21:49

raveedc
Contributor
Registered: 2019-01-23
Posts: 6

pixel 3xl walrus, rdv4 iceman flash compatibility & Stand Alone Mode

Is there a way to get the PROXMARK 3 RDV4 with Iceman fork to work in standalone mode with a pixel 3xl?

The plan is to go to a festival and read people's bracelets and out their read credentials onto our bracelets which have mifare rfid in them.

I am able to write someone else's credentials onto a mifare rfid correct?

Please help to answer both questions above.

Also will I have to downgrade to a different fork to have my rdv4 work in standalone mode with walrus running on my pixel3XL?

Offline

#2 2019-06-17 15:08:01

Mackwa
Contributor
Registered: 2016-06-10
Posts: 41

Re: pixel 3xl walrus, rdv4 iceman flash compatibility & Stand Alone Mode

proxmark3 standalone mode works with any usb power supply, so it should also work with a pixel 3xl smile

Offline

Board footer

Powered by FluxBB