Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2010-12-13 21:32:32

djrocket
Member
Registered: 2010-12-13
Posts: 3

Unknonw command

Hi,

After receive the "Reader authentication successful" the next command is a Unknonw command: 0F 80 i think is halt but i'm not sure i include data i have. can anybody help me?

this is what i have:
Sector:
        { 0xEC, 0x53, 0x05, 0xB2}, // UID
        { 0xB1, 0x7D, 0x8B, 0x01}, // 32 bit LSB key
        { 0x00, 0x00, 0xAE, 0x4C}, // 16 bit reserved, 16 bit MSB key
        { 0xC8, 0xA8, 0x1A, 0xFA}, // Configuration, password TAG
        { 0x00, 0x00, 0x00, 0x00}, // user data
        { 0x00, 0x00, 0xFF, 0xFF}, // user data
        { 0x00, 0x00, 0x00, 0x00}, // user data
        { 0x00, 0x00, 0x00, 0x00}, // user data

Trace:
           { 2, 0x0000000000000018LL,  5, 3},  //  0
            { 1,         0xEC5305B2LL,  0, 0},  //  1
            { 2, 0xD3CA37020191F232LL, 64, 0},  //  2
            { 1,         0x474C5CF7LL,  0, 0},  //  3
            { 2, 0x0000000000005EC0LL, 10, 0},  //  4
            { 1,         0x00007AFCLL,  0, 0},  //  9
            { 2, 0x0000000000002500LL, 10, 0},  //  4
            { 1,         0x0000A280LL,  0, 0},  //  9

Thanks

Offline

#2 2010-12-13 21:38:26

djrocket
Member
Registered: 2010-12-13
Posts: 3

Re: Unknonw command

sorry it's Hitag2

Djrocket

Offline

Board footer

Powered by FluxBB