Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-06-12 16:07:20

fidel
Contributor
Registered: 2016-10-17
Posts: 28

Iceman softwear

Hi Iceman,
I was wondering the your software with enhanced Keys for Mifare plus card, can be installed on Proxmark Rv2.
and if not, is there a way of adding these keys in.
As always your help is greatly appreciated.
Cheers

Offline

#2 2019-06-12 18:35:29

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Iceman softwear

Sorry, you lost me.  Enhanced keys for Mifare Plus card?

Offline

#3 2019-06-12 19:18:17

fidel
Contributor
Registered: 2016-10-17
Posts: 28

Re: Iceman softwear

I have a proxmark rv2 that I bought 2 years ago from Elechouse, and never updated the firmware, I was good for my purpose.
But when I want to Read the mifare cards, ( Not All , Some) The proxmark "Can't authenticate to block"
When I saw your demonstration of RV4, You mentioned that you have added some keys, to the software,(using rdv4 flashmem for dictionary file)
can this be added To RV2, or I need Rv4 ?
or does This dictionary exist in Iceman1001 ?
Thank you

Offline

#4 2019-06-12 19:48:38

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Iceman softwear

just take the default keys dictionary from the other repos.  (RRG repo version has the most)

The flashmem version will only work for RDV4.

Offline

#5 2019-06-12 20:18:34

fidel
Contributor
Registered: 2016-10-17
Posts: 28

Re: Iceman softwear

Thank you for all your wisdom,
other question I have,  using the keys, I have cracked all the Sectors on the cards, and created an eml. file, on proxmark,
But when I want to load the dump file into CUID, or Gen2 fobs,( Not to be Detectable By the reader) , I get the Massage of No being able to Authenticate  as well.
Why is This?

I am in Canada, what site do you recommend for getting an RV4?
Cheers

Offline

#6 2019-06-13 16:13:03

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Iceman softwear

Try to keep one subject per forum thread.  Its easier for everyone.

For your gen2,  the message indicates you don't have the right key for writing to the tag.

You can order from anyone of the three distributors. Hackerwarehouse.com, Lab401.com, Sneaktechnology.com

Offline

Board footer

Powered by FluxBB